Panasonic ES-LS9A-K803, Operating Instructions Manual

Page: 13 / 330

13
TR
RO
H
SK
CZ
PL
FIN
S
N
P
DK
E
NL
I
F
D
GB
Preparation
Charging the shaver
•Turn the shaver off.
•Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
[
B 
] into the shaver�
2
Plug the adaptor [
B 
] into
a household outlet�
•Check that the charge status
lamp ( ) is glowing.
•Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor
after charging is completed�
1
2
Note
You cannot operate the shaver while charging.
Quick charge
Even though the battery runs out, you can shave
once after 3‑minute charge.
(This will differ depending on usage.)
While charging
After charging is
completed
glows.
The battery capacity
lamp will increase as
charging progresses.
All the battery capacity
lamp and will glow and
then turn off after
5 seconds.
Notes
• When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
•Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the
charge status lamp ( ) will blink quickly and the
battery may fail to charge properly in extremely high
or low temperatures.
•The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave usage per day in
an ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode