Panasonic ES CV51, Operating Instructions Manual

Page: 18 / 314

18
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store
where you purchased the unit or a service centre authorized
by Panasonic for repair.
Problem Action
The power switch does
not turn ON.
Unlock the switch lock.
(See page 14.)
The shaving sensor
does not respond.
Depending on the beard
thickness or the amount of beard
trimmings in the shaver head,
the shaving sensor may not react
and the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the type
and quantity of the shaving gel.
This is not abnormal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 16.)
The shaving sensor may not
respond when there is not
enough oil on the blades.
Problem Action
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 15.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Operating time is short
even after charging.
Apply oil.
This can be improved by cleaning
every time after shaving.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Shaver does not operate
even after charging.
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
end of its life.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
ES-CV51_EU.indb 18 2017/08/04 19:57:14