Panasonic ER-GB60, Operating Instructions Manual, Page: 10 / 280

10
English
Chargingthetrimmer
•
Make sure that the trimmer is turned off.
1
1
Connecttheapplianceplugto
theappliancesocket.
2
2
Plugintheadaptorintoa
householdoutlet.
•
Check that the charge status lamp glows.
•
Charging is completed after approx.
1 hour.
1
2
3
3
Disconnecttheadaptorwhenthechargestatus
lampstopsglowing.
•
Recommended ambient temperature for charging is
0 – 35 °C. Battery performance may decrease under
extremely low or high temperatures, and the battery may
not be charged properly.
•
A full charge supplies enough power for approximately
50 minutes of use.
The operating time may differ depending on the frequency
of use, the operating method and the ambient temperature.
•
When charging the trimmer for the first time or when it has
not been in use for more than 6 months, the lamp on the
main body may not glow for a few minutes, or the operating
time may shorten. Please charge it for more than 8 hours in
such cases.
ACoperation
If you connect the AC adaptor to the trimmer in the same way as
for charging, and turn on the power, you can use it.
•
If the remaining battery is too low, the blades may move slowly or
stop, even with the AC operation. In this case, charge the battery
for 1 minute or more.
•
The battery will be discharged, even with the AC operation.
Usingthetrimmer
•
Make sure that the trimmer is turned off.
•
We recommend using the trimmer in an ambient temperature
range of 0 – 35 °C. If used outside this range, the appliance may
stop operating.
1
1
Mountthedesiredcombattachmentandadjust
thetrimmingheightasneeded.(Seepage11.)
•
It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
•
Actual hair length will be a little longer than the height you
set.
2
2
Pressthepowerswitchtoturnon
thepower.