Safety precautions
Follow these instructions.
To prevent accidents, injuries or damage to
property, please follow the instructions below.
■
The following chart indicates the
degree of damage caused by
improper operation.
WARNING
Indicates potential
hazard that could
result in serious
injury or death.
CAUTION
Indicates potential
hazard that could
result in minor injury
or property damage.
WARNING
►
Preventing accidents
• Do not place within reach of
children or infants. Do not let them
use it.
- Putting parts or accessories in the
mouth may cause an accident or injury.
CAUTION
►
Protecting the skin
•
Do not press the blade firmly
against the skin.
• Do not use any blade other than
the one dedicated.
• Do not use this appliance for any
purpose other than trimming beard
and hair.
• Do not directly apply the blades on
ears or rough skin (such as
swellings, injuries or blemishes).
- Doing so may cause injury to ears
or uneven skin.
• Check the blades are not damaged
or deformed before use.
- Failure to do so may cause injury to
the skin.
Important information
• Apply the lubrication oil to the blade
before and after each use.
Failure to apply the lubrication oil may
cause the following problems.
- The appliance has become blunt.
- Shorter operating time.
- Louder sound.
Parts identification
(Fig. 1)
A
Head
1
Water inlet
2
Trimming height indication mark
3
Dial (Height adjustment control)
4
Water outlet
5
Blade
Accessories
B
Comb attachment [A]
(1 mm [1/32˝] to 10 mm [13/32˝])
C
Comb attachment [B]
(11 mm [7/16˝] to 20 mm [51/64˝])
How to use
• Clean the appliance after use.
1
Mount the head to the main body
until it clicks.
2
Mount the desired comb attachment
and adjust the trimming height as
needed.
▪
It can also be used without the comb
attachment.
(Trimming height: approx. 0.5 mm [1/64˝])
▪
Do not use the comb attachment on
wet hair. Wet hair might clump or stick
to the skin as it will be difficult to trim.
▪ Setting of 10.5 mm (0.41˝) is unavailable.
3
Turn on the power.
Operating Instructions
(Household use)
Trimmer Head
Model No.
ER-CTN1
4
-1
-2
-3
-4
1
2
3
5
6
7
8
ER-CTN1_US_PR.indd 1
2022/02/21 15:08:49
