9
8
SONIC VIBRATION: TURNING ON AND OFF
1. To use the sonic vibration, make sure the “On/Off” switch at the top
of the controller is on. Make sure that the operating lamp comes on.
2. If you do not have any audio input, but still want to experience
vibration, select the “Vib.” switch. This will go through an
approximately 15 minute program of vibrations in your back area.
You can change the intensity of the vibration by holding down the
up/down arrows on the intensity adjustment buttons.
3. If you are using an audio input (see instructions on page 8 for
hooking it up), you can experience vibrations that are
synchronized to the lower frequencies of the audio. To experience
this, hit the “Sonic Audio” switch. Again, you can adjust the intensity
of the synchronized vibrations with the intensity up/down arrows.
Sonic vibration intensity is adjustable to different 9 levels. Pressing
an adjustment button twice will move the indicator light up or down
one position.
Automatic timer for sonic vibration
“Sonic Audio” is designed to switch off automatically after 75 minutes of continuous use, if no
intensity adjustment buttons are pushed during that time. This will be extended by 75 minutes,
even after turned off by the timer, by touching the “Sonic Audio” switch. “Vib.” is designed to
shut off after approximately 15 minutes, if no intensity adjustment buttons are pushed.
Even if automatically turned off, you can easily return to the previous vibration intensity by
pressing the “Sonic Audio” or “Vib.” switch.
If the Air Massager is not operated for approximately 15 minutes after “Sonic Audio” or “Vib.”
have been switched off by the timer, the “On/Off” switch will also be automatically switched off.
MAINTENANCE
• When cleaning the massager, always unplug first.
• When the covering material needs cleaning, gently apply a little liquid soap, wipe with a damp
cloth and allow to dry naturally. When plastic parts need cleaning, wipe with a soft cloth dipped
in a mixture of lukewarm water and liquid soap.
• Do not use paint thinner, benzene or other solvent-based cleaners, as chemical substances
may cause discoloration or damage.
CONNECTING TO AUDIOVISUAL EQUIPMENT
ENJOY MUSIC OR A VIDEO WHILE YOU RELAX
The Household Air Massager uses a built-in sonic transducer to create sonic vibrations. By
connecting the cables supplied with the Household Air Massager to audiovisual equipment, you
can feel sound as vibrations synchronized with the bass of an audio frequency.
In the case of an RCA-type audio
output
Use the 20-ft cable and connect the
minijack to the appliance and the RCA
red and white plugs to the audio output
of a television, etc.
In the case of a minijack-type audio
output
Connect the minijack on one end of the
5-ft cable to the appliance and the other
minijack to the audio output of a CD
player, etc.
When the only available audio output
is a headphone jack
To listen with headphones: Connect the
headphone double adaptor jack plug to
the headphone jack of a television etc.,
then use a minijack on one end of the
5-ft cable to connect to the appliance
and the other minijack to connect to the
headphone double adaptor jack plug.
Personal
CD player
Television or
other audiovisual
equipment
Television,
computer or
other audiovisual
equipment
(not included)
(not included)
NOTE:
1. Vibratory responsiveness may be inhibited at times due to the signal content of the audiovisual
source.
2. Output terminals from audiovisual devices that are monaural cannot be used.
3. If supplied cable length is insufficient, please purchase commercially available stereo cable.