Panasonic EP1081K Operating Instructions Manual Download Page 4

Middle Back

(Repeat)

Shoulder

Back

Lower back

Lumbar

(Repeat)

Shoulder

Back

Lower back

7

6

USING THE HOUSEHOLD AIR MASSAGER

AIR MASSAGE: TURNING ON AND OFF

Upper Back

OUTLINE OF AIR MASSAGE SELECTION

(Repeat)

Before using, make sure you have read all the
instructions, including warnings and safety and
operating precautions. 

1. Make sure the compressor cable is connected to the

air compressor.  See picture on page 5.

2. Make sure that the compressor cable is not crimped.

If it is, this will stop air flow to the Air Massager.

3. Turn on the main power switch on the air compressor,

making sure the unit is plugged in.  Make sure the
main power switch is illuminated.  The air
compressor provides air to the Air Massager, and is
also the power source for the Air Massager.

4. To operate the air massage, press the “On/Off”

switch at the top of the controller.  Make sure that
the operating lamp comes on.  If it does not, check
the connection between the air compressor and the
Air Massager, and make sure the unit is on.

5. Select any one of the air massage selection switches.  If you just want to have lumbar

support, push this button only.

6. Areas being massaged are indicated by the air massage display lamps.
7. The Air Massager can be used upright, slightly reclined, or lying down.  Weight limit is 264

pounds (120 k

N

).

8. Please note that the intensity of the air massage cannot be controlled by the intensity

adjustment buttons.  This intensity control is only for the vibration functions.
However, the intensity of the air massage can be enhanced when you use it in a reclined, or
lying down position.  Your own body weight on the air nodes provides for a stronger massage.

NOTE: The design of the air nodes causes them to make a slight popping noise when
separating one’s body from the product.  This is not a malfunction.  It is just the sound of the air
nodes returning to their original shape.  Some noise may be heard coming from the appliance
while in use. This is due to the construction of the appliance and is normal.

Automatic timer for the air massage

To prevent excessive use, a built-in timer automatically switches the massage off 15 minutes
after the start of the air massage, if no switches for air massage are pressed. If the Air
Massager is not operated for approximately 15 minutes after the air massage has been
switched off by the timer, the “On/Off” switch will also be automatically switched off.

Shoulder

Back

Lower back

Operating

 lamps

Stretch Wave

(Repeat)

Shoulder

Back

Lower back

Automatic timer for “On/Off” switch

If the appliance is left for 60 minutes unused, the “On/Off” switch will automatically revert to off.
NOTE: When not using the appliance for long periods of time, please turn off the main power
switch on the air compressor and then unplug it.  (Due to standby power consumption, the
appliance will consume 5W of power even with the “On/Off” switch on the controller turned off.)

Summary of Contents for EP1081K







Reviews: