Panasonic EP-MA03, Service Manual, Page: 34 / 72

34
9 Disassembly and Assembly Instructions
Before starting work
• When cutting the cable ties, make sure not to cut any fabric,
hoses, or cables.
• When attaching the cable ties during assembly, fix them in
place with white tape.
9.1. Removing the Armrests (Right/
Left)
1. Remove the screws on the bottom of the armrests (two on
each armrest), and lift the armrests upwards.
Caution:
• During assembly, replace the armrests as shown in the
diagram below.
2. Remove one rivet from the rear of each armrest and
remove the side cover, taking care of six hooks as you do
so.
Caution:
• The controller stand is attached to the right-hand arm-
rest. To replace the controller stand, remove four screws.
3. Remove two screws.
Caution:
• Only the left-hand side is fitted with a safety cover.
• During assembly, attach the front screws first.