PAN1740A Bluetooth Module
11 Regulatory and Certification Information
Module Integration Guide Rev. 1.1
Page 41 of 44
11.4 European Conformity According to RED (2014/53/EU)
All modules described in this Module Integration Guide comply with the
standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU)
together with RED (2014/53/EU) articles.
Standards
•
Due to the model size, the CE marking is displayed in the installation instruction and on
the package label only. It cannot be displayed according to regulation (EU) No. 765/2008
in 5 mm height on the module’s label due to the limited space.
•
The end product OEM has to re-assess the conformity of the end product to EU
regulations, but can use the PAN1740A RED pre-assessment to shorten this procedure.
•
The RED EU Type Examination Certificate No.
T818698M
issued by the Notified
Body 0682 can be used for the OEM end product conformance assessment. If a Notified
Body has been contracted for the end product conformity assessment, it should be noted
that this EU Type Examination Certificate should be used for conformance assessment.
As a result of the OEM end product conformity assessment procedure described in 2014/53/EU
Directive and other applicable EU directives, the end customer equipment should be labelled as
follows:
The requirements for CE marking are described in regulation (EU) No. 765/2008
Annex II.
The end customer has to assure that the device has a distance of more than
5
mm from the human body under all circumstances.
If the end customer application intends to use the PAN1740A in a distance
smaller 5 mm from the human body, SAR evaluation has to be repeated by the
OEM.
The end customer equipment must meet the actual Safety/Health requirements
according to RED.
PAN1740A and its model versions in the specified reference design can be used in all countries
of the European Economic Area (Member States of the EU, European Free Trade Association
States [Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra, and Turkey.
