![Panasonic ElitePANABOARD UB-T880 Operating Instructions Manual Download Page 17](http://html.mh-extra.com/html/panasonic/elitepanaboard-ub-t880/elitepanaboard-ub-t880_operating-instructions-manual_269652017.webp)
Usage
17
Operating Instructions
1
Notice
•
When the electronic pen and your finger are used simultaneously, the elite Panaboard can not
recognize these separately. Wait 1 second or more when changing between your finger and the
electronic pen. When changed in a shorter time or when the electronic pen and your finger touch
simultaneously, the result is according to which one the elite Panaboard recognized first.
•
Confirm that the status LED lights when using the electronic pen.
•
To avoid operating errors, do not touch the penpoint when the electronic pen is not in use.
Inserting (Replacing) Batteries
Registering the Electronic Pen
The elite Panaboard automatically detects electronic pens within approximately 10 m (approximately 30 ft.),
but if other electronic whiteboards are nearby, electronic pens for those whiteboards may be detected
accidentally.
Similarly, other electronic whiteboards may detect electronic pens for the elite Panaboard. In the
following cases, register the electronic pen to the elite Panaboard.
•
Buttons on the electronic pen are unresponsive
•
The elite Panaboard responds to the electronic pen as if you were touching the elite Panaboard with your
finger
•
The elite Panaboard responds as if you were operating it, but you are not
•
elite Panaboard operation is erratic
Once you register an electronic pen, it cannot be used with another electronic whiteboard. (The whiteboard
responds as if you were touching it with your finger instead of the electronic pen.)
To use registered electronic pens with another electronic whiteboard, unregister the pens.
See “Registering the Electronic Pen” and “Unregistering the Electronic Pen” in “Software Help” for
instructions on registering and unregistering the electronic pen.
For details on accessing the help information, see “Viewing the Help of the Software” (page 27).
1.
Unlock the battery cover (
1
),
and open the cover (
2
).
•
When replacing the cover, follow the procedure in
reverse.
2.
Insert (replace) the battery, and then
reattach the cover and lock it.
•
Make sure to use a AAA alkaline battery, and
ensure that
+
and
-
face the correct directions.
•
Dispose of expired batteries quickly, by covering
the terminals in tape and following the disposal
regulations in your country/area.
UB-T880-PJQXC0337ZA_mst.book 17 ページ 2010年5月11日 火曜日 午後1時9分