Panasonic EB-GD96 Page 79 Operating Instructions Manual Download

Page: 79 / 96

Glossary of Terms

APN

Access point name. Directs the user to the

gateway or the required service.

CHAP

Challenge Handshake Authentication protocol. A

security feature for the GPRS network.

DTMF Tones

Dual Tone Multi-Frequency tones allow you to

communicate with computerized phone systems,

voice mailboxes etc.

GSM

Global System for Mobile Communications. The

name given to the advanced digital technology that

your phone uses.

GPRS

General Packet Radio Service. The Technology

the phone uses.

Network

Operator

The organization responsible for operating a

GSM network.

PAP

Password Authentication Protocol. A security

feature for the GPRS network.

Password

Used for the control of the Call Bar. Supplied by

your Service Provider.

Personal Identification Number used for SIM

security. Supplied by your Service Provider. If the

PIN is entered incorrectly 3 times, the PIN will be

blocked.

PIN2

Personal Identification Number used for the

control of Fixed Dial Store and Call Charge

metering. Supplied by your Service Provider. If

the PIN2 is entered incorrectly 3 times, the PIN2

will be blocked.

PUK/PUK2

PIN/PIN2 Unblocking Key. Used to unblock the

PIN/PIN2. Supplied by your Service Provider. If

the PUK/PUK2 is entered incorrectly 10 times,

the PUK/PUK2 will be blocked.

Registration

The act of locking on to a GSM network. This is

usually performed automatically by your phone.

Glossary of Terms

Summary of Contents for EB-GD96

































































































Search results

Summary of Contents for EB-GD96

Reviews:

Related manuals for EB-GD96

Brands by name

Popular brands

Panasonic EB-GD96, Operating Instructions Manual

Search results

Summary of Contents for EB-GD96

Reviews:

Related manuals for EB-GD96

Brands by name

Popular brands