Panasonic EB-GD75 Page 31 Operating Instructions Manual Download

Page: 31 / 84

The logo is now stored and can be selected as an idle screen option from

the Personalise menu.

Setting the Backlight Time

From

Idle

Z Q

, select

Personalise

Display Setting

Backlight Time

Z Q

Use

to cycle through the times available

Z Q

to select the desired time

Using Voice Commands

Before any of the phone’s voice activated functions can be used, it is

necessary to configure the phone so that it will recognize a particular voice

and intonation.

Voice Dial Entry Setup

This function allows the user to recall and dial numbers from the

Phonebook using voice commands.

From

Idle

Z Q

, select

Personalise

Voice Command

Voice Dial

Z Q

to add a new Voice Dial entry to the list

Browse through the Phonebook to select an entry which is to be

attributed with a voice command,

Z Q

twice

Note:

Each recording is short in length, so be prepared to speak soon after

initiating the recording.

When ready, the user should hold the phone approximately 20cm

from his/her mouth,

Z Q

and speak clearly into the

microphone to record the name of the selected Phonebook entry

When the recording has stopped, it will be necessary to repeat the name.

When prompted,

Z Q

and repeat the name

When recording is completed for a second time, the display will indicate if

the recording was successful or not. If unsuccessful, repeat from step 4.

Personalising Your Phone

Summary of Contents for EB-GD75





















































































Search results

Summary of Contents for EB-GD75

Reviews:

Related manuals for EB-GD75

Brands by name

Popular brands

Panasonic EB-GD75, Operating Instructions Manual

Search results

Summary of Contents for EB-GD75

Reviews:

Related manuals for EB-GD75

Brands by name

Popular brands