R
Q
T631
2
6
Getti
ng s
tarted
This page explains how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. To get the full benefit from
the powerful multi-channel audio found on DVDs, you should connect an amplifier and speakers (
➡
[XP50]
This model can decode Dolby Digital and DTS.
[XP30]
This model can play Dolby Digital and DTS, but only in two channels.
Before connection
≥
Disconnect the AC power supply cord.
≥
Refer to the television’s operating instructions.
Connection to a television
AC IN
~
WOOFER
L
COMPONENT VIDEO OUT(480P/480I)
S VIDEO
OUT
OUT
P
B
Y
P
R
R
VIDEO OUT
COMPONENT VIDEO OUT(480P/480I)
P
B
Y
P
R
VIDEO OUT
S VIDEO
OUT
COMPONENT
VIDEO IN
Y
P
B
P
R
S VIDEO
IN
AUDIO
IN
L
R
VIDEO
IN
Basic connection to a television
Television
red white yellow
Audio/video
cable
(included)
red white yellow
Enjoying higher picture quality
Video cable
(not included)
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive output and provide
a purer picture than the S VIDEO OUT terminal. Connection using these terminals
outputs the color difference signals (P
B
/P
R
) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
≥
The description of the component video input terminals depends on the
television or monitor (e.g. Y/P
B
/P
R
, Y/B-Y/R-Y, Y/C
B
/C
R
). Connect to terminals of
the same color.
≥
After making this connection, change the black level for a better picture.
(
➡
page 21, Video—Black Level Control)
When making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.
You can connect the audio cable
to the 2-channel audio input
terminals of an analog amplifier
or system component to enjoy
stereo or Dolby Pro Logic.
S VIDEO OUT terminal
The S video terminal achieves a more vivid picture than
the VIDEO OUT terminal by separating the chrominance
(C) and luminance (Y) signals. (Actual results depend on
the television.)
S video cable
(not included)
AC power
supply cord
(included)
Television
Television
To household AC outlet
(AC120 V, 60 Hz)
To enjoy progressive video
≥
Connect to the component video (480P) input terminals on a television compatible with this unit’s copy guard system. (Video will not be displayed
correctly if connected to an incompatible television.)
≥
In QUICK SETUP, set “Progressive Out” to “Enable” (
➡
For your reference
≥
All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another
brand of television.
Connection
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
not be played correctly due to the copy guard.
Conserving power
This unit consumes a small amount of power, even when it is turned
off (approx. 2 W).
To save power when the unit is not to be used for a long time, unplug it
from the household AC outlet.
XP50‑30.book 6 ページ ２００２年８月２日 金曜日 午後４時７分
