Panasonic DVD-S35EE Service Manual Download Page 93

Page: 93 / 230

file:///C|/Documents and Settings/eDOK/

Рабочий

стол

/DVD-S35xx/s1104010200.html

11.4.1.2 Important points

TOP

1. Make tangential adjustment first, and then make tilt adjustment.

2. Repeat adjusting two or three times to find the optimum point.

3. Finish the procedure with tilt adjustment.

Jitter value depends on the model:

If the jitter value changes like B, the optimum point is easy to find.

If the jitter value changes like A, set the optimum point near the middle.

TOP

file:///C|/Documents and Settings/eDOK/

Рабочий

стол

/DVD-S35xx/s1104010200.html03.10.2007 22:48:40

Summary of Contents for DVD-S35EE







































































































































































































































Search results

Summary of Contents for DVD-S35EE

Reviews:

Related manuals for DVD-S35EE

Brands by name

Popular brands

Panasonic DVD-S35EE, Service Manual

Search results

Summary of Contents for DVD-S35EE

Reviews:

Related manuals for DVD-S35EE

Brands by name

Popular brands