Panasonic DP-UB9004, Operating Instructions Manual

Page: 29 / 48

- 29 -
Playback
∫ Sound Effects *1*2
Select the sound effect.
(Upsampling up to 192 kHz/32 bit is possible.)
This setting is also able to switch by pressing
[SOUND EFFECT].
≥ Night Surround :
Enjoy a movie with powerful sound even when
the volume is kept low at night. The audio is set
in such a way that it can be heard easily.
– Audio with a sampling frequency higher than
192/176.4 kHz will be down-sampled to 192/
176.4 kHz for output.
≥ Remaster :
This feature gives you brighter sound by
increasing the high frequency portion of the audio.
– This setting does not apply to audio with a
sampling frequency higher than 192 kHz.
Recommended setting
≥
Digital Tube Sound :
This feature gives you a warm sound, like that
produced by a vacuum tube amplifier.
– This setting does not apply to audio with a
sampling frequency higher than 192 kHz.
Recommended setting
∫
Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
≥
Even when “96/88.2kHz” is selected, an audio
source with a sampling frequency of 96 kHz or
higher will be output with the original sampling
frequency.
≥
When “Sound Effects” is set to “Off”, this setting
is disabled.
∫
DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
≥
Even when “352.8kHz” is set, the same audio
output setting as “176.4kHz” is applied during
digital audio output.
∫ DSD LPF Setting
Select the settings that suit your sound quality
preferences.
∫ Dialogue Enhancer * 2
The volume of the centre channel is raised to
make dialog easier to hear.
∫ High Clarity Sound
Stop processing signals that affect the audio
quality or turn off the unit’s display to make the
audio quality clearer. (
>
33)
Select whether or not to output images.
This setting is able to switch by pressing [HIGH
CLARITY].
≥ If “On (Video Off)” is selected, the setting will be
cancelled when video playback ends.
∫
Analogue Out Filter
This allows you to change the digital filter setting
for the internal DAC (digital-analogue converter).
∫
Analogue Volume (dB)
This adjusts the volume of all the analogue
AUDIO OUT terminals.
*1 Not every function can be set individually.
*2
This function is effective for audio from HDMI OUT or
DIGITAL AUDIO OUT only when “Digital Audio Output” is
set to “PCM” (
> 32).
∫
Signal Format
∫
Graphic Display Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
Sound Settings
Remaster 1 Pop and rock
Remaster 2 Jazz
Remaster 3 Classical
Digital Tube
Sound 1
A crisp, delicate sound
Digital Tube
Sound 2
A tight, hi-fi sound
Digital Tube
Sound 3
A soft, rich sound
Digital Tube
Sound 4
A clear, powerful sound
Digital Tube
Sound 5 A distinctive mid-range
sound
Digital Tube
Sound 6
A soft, enveloping sound
3D Settings
Original Keep original picture format.
Side by side
3D picture format comprising
of left and right screens.