7.3.10 Margin feature
You can set the unit not to copy a particular edge of the document to make a margin. This is useful for binding
the copied documents.
1.
Set the original.
2.
For 2-line LCD models (
):
1.
/COPY
/PAGE LAYOUT
(repeatedly):
"
MARGIN
"
2.
Select
"
ON
"
.
OK/SET
3.
Select the desired page layout.
OK/SET
4.
Select the edge you want to set the margin for.
OK/SET
5.
Enter margin width using the dial keypad.
OK/SET
For touch panel models (
):
1.
Display
"
Settings
"
"
MARGIN
"
2.
"
MARGIN
"
"
ON
"
3.
"
ORIENTATION
"
Select the desired page layout.
4.
"
SIDE
"
Select the edge you want to set the margin for.
5.
"
MARGIN
"
Select margin width.
"
OK
"
"
OK
"
3.
If necessary, enter the number of documents (up to 99).
4.
/START
Note
• After you finish copying, press
:
/STOP
/
:
to reset this feature.
• To automatically reduce the copies according to the set margin, see feature #474.
• This feature and page layout features cannot be used at the same time.
• You can hold the previous margin setting (feature #475).
7.3.10 Margin feature
Operating Instructions
99
