manualshive.com logo in svg

Panasonic DP-MB500 series, Operating Instructions Manual

Share
Download
Panasonic DP-MB500 series Operating Instructions Manual Download Page 35

To modify the software (To add or uninstall each
component)

You can select the components to install or uninstall
anytime after the installation.

1.

Start Windows and insert the supplied CD-ROM
into your CD-ROM drive.

2.

[

Modify

] 

 [

Modify Utilities

]. Then follow the

on-screen instructions.

To uninstall the software

[

Start

] 

 [

All Programs

] 

 [

Panasonic

] 

the unit's name 

 [

Uninstall

]. Then follow the on-

screen instructions.

To install or uninstall additional printer drivers

To install or uninstall the PCL printer driver, see
page 157.
To install or uninstall the PS (PostScript

®

) printer

driver, see page 157.
To install or uninstall the XPS (XML Paper
Specification) printer driver (Windows 7 or later), see
page 157.

2.8.4 Other information

Operating Instructions

35

Summary of Contents for DP-MB500 series









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands