Panasonic DP-MB311EU, Operating Instructions Manual

Page: 73 / 144

Feature Code Selection
Custom size 1 for
copying #391 To customise the recording paper size for copying.
1. MtN A MBNM 3 NM 9 NM 1 N A M OK N
2. Enter the custom size width (210.0 - 215.9 mm), using the dial keypad. A
M OK N
3. Enter the custom size length (279.4 - 355.6 mm), using the dial keypad. A
M OK N
4. Enter the name of the setting, using the dial keypad (up to 8 characters).
A M OK N A MtN
Note:
R If you have set feature #147 to “
INCHES
” , the numbers are displayed in
inches.
Custom size 2 for
copying #392 To customise the recording paper size for copying.
1. MtN A MBNM 3 NM 9 NM 2 N A M OK N
2. Enter the custom size width (210.0 - 215.9 mm), using the dial keypad. A
M OK N
3. Enter the custom size length (279.4 - 355.6 mm), using the dial keypad. A
M OK N
4. Enter the name of the setting, using the dial keypad (up to 8 characters).
A M OK N A MtN
Note:
R If you have set feature #147 to “
INCHES
” , the numbers are displayed in
inches.
Power save #403 To set the length of time before the unit enters power save mode.
M 1 N “
1min
” (default)
M 2 N “
5min
”
M 3 N “ 15min ”
M 4 N “
30min
”
M 5 N “
45min
”
Note:
R During power save mode, the unit needs to preheat the fuser unit before it can
begin printing.
Contrast hold #462 To hold the previous contrast setting.
M 0 N “
DISABLED
” (default)
M 1 N “
ENABLED
”
Note:
R This feature is not available for scanning contrast.
Default operation
mode #463 To select the default operation mode when the selected time of the mode timer
(feature #464) elapses.
M 1 N “
COPY
” (default)
M 2 N “
FAX
”
Note:
R You cannot select scan mode using this feature.
Mode timer #464 To set the timer before returning to the default operation mode (feature #463).
M 0 N “
OFF
”
M 1 N “
30s
”
M 2 N “
1min
” (default)
M 3 N “
2min
”
M 4 N “
5min
”
Counter view for
departments #479 To view the count number of copies/prints for departments. See page 99 for
details.
73
10. Programmable Features