Panasonic DP-MB311EU, Operating Instructions Manual

Page: 31 / 144

Pinch the knob ( A ), and slide the input tray extender
( B ) to the appropriate position.
A B
For A5 and B5 (ISO/JIS) size paper:
If the input tray extender is extended, pinch the knob
(
A ) and then slide it inside.
A
4
Load the paper, print-side down ( A ).
Important:
R Push down to lock the plate ( B ) in the
standard input tray, if necessary.
B
A
R If necessary, slide the recording paper guides to
adjust the width to the size of the recording paper.
R Make sure that the recording paper is under the
paper limit mark (
A ), and the paper should not
be loaded over the snubbers ( B ).
A
B
5
Insert the standard input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Note:
R If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
R If the standard input tray does not close, the plate in
the standard input tray may not be in the locked
position. Push the paper down and make sure that
the paper is laying flat in the standard input tray.
31
4. Recording Paper and Documents