Panasonic DP-C266, Operating Instructions Manual

Page: 141 / 230

141
Chapter 5
Internet Fax
Settings for Inbound Routing
To use the Inbound Routing feature, program the following parameters to meet the type of routing in
Function Parameters (Fax/Email Settings > Fax Parameters):
z For more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
Routing Type Explanation Function Parameters
Routing by sub-addressing Set this parameter to perform an ITU-T sub-
address query within its auto dialler, and to route
the received document(s) to corresponding
station’s Email address(es) or telephone
number(s).
Set “ 152 Sub-Addr
Routing ” to “ Valid ”.
Routing by the numeric ID
of a sending fax station Set this parameter to perform a numeric ID (TSI
frame information) query within its auto dialler, and
to route the received document(s) to the
corresponding station’s Email address(es) or
telephone number(s). Set “ 153 TSI Routing ” to
“ Valid ”.
To set the From field Use this parameter to select the type of Email
header to be included in the “
From ” field of each
routed faxes.
• Originator (Origi):
The originating fax machine’s TSI will appear in
the “
From ” field of the routed Email.
• Relay Station (Rly Stn):
The routing station’s Email address will appear
in the “
From ” field of the routed Email.
Program “ 154 Route
Header FMT ”.
To program printout of
received documents Select whether to print all documents received on
this machine (“
Always ”), or print them only if
inbound routing fails (“ Inc Only ”).
Program “ 155 Print Routed
Doc ”.