Panasonic DP-C213I Operating Instructions Manual Download Page 54

Page: 54 / 98

Chapter 2 More Menus F

eatures

Auto Zoom

By setting Auto Zoom, originals can be automatically Enlarged/Reduced to fit the size of the loaded
paper.

This function can be selected when the original is placed on the platen.

As the original is placed on the platen, the position of the original may be erroneously detected if influenced by
ambient light.

If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.

Open the ADF more than 45 degrees,
and then place the original on the
platen, leaving it open.

Refer to

Placing Originals (Copy)

in the

Operating Instructions (For Basic
Operations) of provided booklet.

Press the

Copy

key if the machine is

set to other function mode.

Select “

More Menus

”.

Select “

Zoom / Effects

”, and then

select “

Auto Zoom

”.

Face Down. Align with top left
corner.

Summary of Contents for DP-C213I



































































































Search results

Summary of Contents for DP-C213I

Reviews:

Related manuals for DP-C213I

Brands by name

Popular brands

Panasonic DP-C213I, Operating Instructions Manual

Search results

Summary of Contents for DP-C213I

Reviews:

Related manuals for DP-C213I

Brands by name

Popular brands