Panasonic DP-7240 Operating Instructions Manual Download

Page: 89 / 336

Press the [FRONT STAPLE] (or [DOUBLE STAPLE] or [REAR STA-
PLE]) button.

• Set other copy modes as required.

Press the [START] button.

If the paper quantity exceeds the maximum number of sheets that can be stapled, the Finisher automatically
enters the sort mode.

Maximum number of sheets for stapling

The maximum number of sheets can be stapled at a time (in case of 17 to 20 lb. Bond plain paper) is
shown below.

2-Bin Finisher (DA-FS850)

2-Bin Saddle-Stitch Finisher (DA-FS855)

•

For the tray loading capacity,

P.324 “2.Specificatons of Options”

•

Two covers of 17 lb. Bond to 110 lb. Index can be added. In this case, the covers are included in the
maximum number of sheets that can be stapled.

Paper size

Number of sheets

LT, A4, B5

LD, LG, LT-R, COMP, A3, B4, A4-R, FOLIO

Paper size

Number of sheets

LT, A4, B5

LD, LG, LT-R, COMP, A3, B4, A4-R, FOLIO

Summary of Contents for DP-7240

















































































































































































































































































































































Search results

Summary of Contents for DP-7240

Reviews:

Related manuals for DP-7240

Brands by name

Popular brands

Panasonic DP-7240, Operating Instructions Manual

Search results

Summary of Contents for DP-7240

Reviews:

Related manuals for DP-7240

Brands by name

Popular brands