Panasonic DP-7240 Operating Instructions Manual Download

Page: 62 / 336

2. HOW TO MAKE COPIES

5. Stopping Copy Operation

Press the [STOP] button on the control panel to stop scanning or continuous copying.

When the following menu is displayed, press the [MEMORY CLEAR]
button on the touch panel.

• During scanning: The data scanned up to then is deleted.
• During continuous copying: Copying stops and the data scanned up to then is deleted.

If there is any copy job waiting, this job will start.

Press the [STOP] button on the control
panel during scanning (or continuous
copying).

Summary of Contents for DP-7240

















































































































































































































































































































































Search results

Summary of Contents for DP-7240

Reviews:

Related manuals for DP-7240

Brands by name

Popular brands

Panasonic DP-7240, Operating Instructions Manual

Search results

Summary of Contents for DP-7240

Reviews:

Related manuals for DP-7240

Brands by name

Popular brands