Panasonic DP-4530, Operating Instructions Manual

Page: 94 / 224

94
Chapter 4 Fax Reception
Receive to Memory
What is Memory Reception?
Memory reception allows all incoming documents to be stored in memory, instead of printing them onto
the output tray.
z If the Memory Reception feature has been set in Function Parameters, the message “Receive to Memory”
appears on the Touch Panel Display.
z Documents received in memory are printed when the pre-programmed password is entered. The received
documents are deleted from memory when the printing completes.
This section explains how to program memory reception, and print documents received into the
memory.
z The standard setting of “ Receive to Memory ” is set to “ Off ” in “ More Menus ”.
z You can set the password in Function Parameters (Fax/Email Settings > Fax Parameters).
z When memory becomes full, the memory reception is aborted and the communication is cancelled. Pages
already received in memory can be printed.
z Once memory is full, incoming documents can no longer be received into memory.
z If “ Receive to Memory ” has been set to “ On ”, the memory reception password cannot be changed in Function
Parameters. To change the password, follow the steps below.
1. Set “ Receive to Memory ” to “ Off ” in “ More Menus ”.
2. Change the password of the Function Parameter “ 37 Receive to Memory ” (Fax/Email Settings > Fax
Parameters).
3. Set “ Receive to Memory ” to “ On ” in “ More Menus ”.
Receiver Sender
Memory