manualshive.com logo in svg

Panasonic DP-4530, Operating Instructions Manual

Share
Download
Panasonic DP-4530 Operating Instructions Manual Download Page 34

34

 Chapter 2    Basic Fax Transmission

Setting the Original Size

The original’s size is usually detected automatically when an original is placed on the Platen Glass.

If the size is not detected automatically, or you would like to change the detected size, you can set the 
Original Size manually by following the procedure below.

z

This feature is not available when the original is loaded on the ADF.

1

Place an original on the Platen Glass.

z

Refer to 

Placing Originals (Facsimile/

Internet Fax)

 in the Operating Instructions 

(For Basic Operations) of provided booklet.

2

Press the 

Fax

 key.

3

Select “

Basic Menu

”.

4

Select “

Original Size

”.

Original size is not 
detected correctly.

Detected Size

Original size is not detected 
automatically.

Icon of the original 
is not displayed.

Face down. Align with the top 
left corner. Close ADF.

Summary of Contents for DP-4530

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands