Panasonic DP-4530 Operating Instructions Manual Download Page 19

Page: 19 / 224

Chapter 2 Basic Fax Transmission

Use Group Dialling

For transmission to multiple destinations using
group dialling, follow the steps below.

The group dialling button must be pre-
programmed. Refer to

Setting for Group Dialling

(see page 183).

Follow the step 1 and 2 on page 14.

Select “

Program/Group

”.

Select the button for the desired
destination group.

To cancel a choice, select the same
destination again.

To confirm the destinations, select
“

Destinations: ###

” on the upper left corner

of the screen.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.

Summary of Contents for DP-4530

































































































































































































































Search results

Summary of Contents for DP-4530

Reviews:

Brands by name

Popular brands

Panasonic DP-4530, Operating Instructions Manual

Search results

Summary of Contents for DP-4530

Reviews:

Brands by name

Popular brands