Panasonic DP-4530 Operating Instructions Manual Download Page 128

Page: 128 / 224

128

Chapter 5 Internet Fax

Setting Message Delivery Notice (MDN)

To enable Message Delivery Notice feature, follow the procedures below.

The standard setting of the Function Parameter “

173 Delivery Notice

” (Fax/Email Settings > Fax Parameters)

can be changed. For instructions on how to change the standard setting, refer to

Fax/Email Settings

in the

Operating Instructions (For Function Parameters) of provided CD-ROM.

Place original(s).

Refer to

Placing Originals (Facsimile/

Internet Fax)

in the Operating Instructions

(For Basic Operations) of provided booklet.

Press the

Fax

key.

Select “

More Menus

”.

Select “

Select Mode

”.

Select “

Delivery Notice

”.

Select “

”, and then select “

”.

Message Delivery
Notice (MDN) request is
enabled.

Message Delivery
Notice (MDN) request is
disabled.

Summary of Contents for DP-4530

































































































































































































































Search results

Summary of Contents for DP-4530

Reviews:

Brands by name

Popular brands

Panasonic DP-4530, Operating Instructions Manual

Search results

Summary of Contents for DP-4530

Reviews:

Brands by name

Popular brands