manualshive.com logo in svg

Panasonic DP-4530, Operating Instructions Manual

Share
Download
Panasonic DP-4530 Operating Instructions Manual Download Page 100

100

 Chapter 5    Internet Fax

What Internet Fax Can Do

This section introduces the functions of the Internet Fax feature.

The Internet Fax feature not only sends and receives Email but also forwards fax documents via a 
telephone line and broadcasts them via a relay station.

Sending Email

A scanned document can be transmitted to an Internet Fax or a remote computer as an Email file 
attachment. Attached files must be in either of the following formats:

•

Internet Fax

: TIFF format (TIFF-F)

•

Computer

: Select either TIFF (TIFF-F) format or PDF format.

z

For more details on sending Email, refer to 

Sending an Email Procedure

 (see page 110).

TIFF (TIFF-F) or PDF format

TIFF (TIFF-F) format

LAN

PC

Internet Fax

Summary of Contents for DP-4530

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands