Panasonic DMR-UBS80EG Service Manual Download | Manualshive

Page: 9 / 93

background image

9

3 Service Navigation

3.1.

External HDD (USB-HDD)

• Certain non-confirmed USB-HDDs cannot be used with this unit.
• If a problem occurs with the USB-HDD, please contact the manufacturer of the device.

3.1.1.

Connecting the USB-HDD

Connect this unit with optional USB-HDD.

• Only one USB-HDD (For recorded titles) can be connected

at the same time.

• Do not connect additional HDDs using a USB hub.
• For details about connection method, refer to the

instructions supplied with the USB-HDD.

3.1.2.

Disconnecting the USB-HDD

Please use the following procedure to disconnect.
Disconnecting without following this procedure may result in the loss of recorded content from the USB-HDD or the internal HDD.

1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Disconnection", then press [OK].
7. Select "Yes", then press [OK].
8. Disconnect the USB-HDD from this unit.

3.1.3.

Registering the USB-HDD

3.1.3.1.

Registering the USB-HDD

• If you use a USB-HDD with this unit, the USB-HDD must first be registered on this unit.

- Registering of a USB-HDD will format the USB-HDD and all the content already recorded will be deleted.
- Up to eight USB-HDDs can be registered on this unit.
- Registered USB-HDDs cannot be used with devices other than this unit.

• If the registering screen appears when connecting the USB-HDD, go to step 7.

1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Registration", then press [OK].
7. Select "Yes", then press [OK].

• If you have already registered eight USB-HDDs, it will be necessary to delete one or more of them before registering a

new USB-HDD.

The message screen appears:
1. Select "Yes", then press [OK].
2. Select the USB-HDD to cancell, then press [OK]. The confirmation screen appears.
3. Select "Yes", then press [OK].

Please use a confirmed USB-HDD.

For the latest information on confirmed USB-HDDs, please check the following website.
http://panasonic.jp/support/global/cs/

«
...
7
8
9
10
11
...
»

Summary of Contents for DMR-UBS80EG






























































































Reviews:

No comments

Related manuals for DMR-UBS80EG

DMP-210 - 32 MB Digital Player

Brand: D-Link Pages: 8

Brand: Teac Pages: 80

Brand: Teac Pages: 16

Brand: Samsung Pages: 136

Brand: Classe Audio Pages: 11

Brand: Nakamichi Pages: 33

Brand: Sonic Blue Pages: 38

Brand: Memorex Pages: 2

Brand: Majestic Pages: 44

SLSX280 - PORT. CD-LOW P

Brand: Panasonic Pages: 6

Brand: JVC Pages: 53

Brand: Harman Kardon Pages: 36

Brand: Crowley Jones Pages: 2

Brand: NAD Pages: 18

Brand: RCA Pages: 40

Brand: D-Link Pages: 24

DMP-210 - 32 MB Digital Player

Brand: D-Link Pages: 36

GoGear SA4MIN 02

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands