Panasonic DMR-UBS80EG Service Manual Download | Manualshive

Page: 11 / 93

background image

11

3.1.3.4.

Registration procedure of USB-HDD for inspection

This function registers a USB-HDD for inspection aside from 8 USB-HDDs that can be registered in Normal mode.
If the USB-HDD for inspection is registered in User mode, it cannot be erased. Make sure to use Special mode to register the USB-
HDD for inspection.

Registration procedure

1. Perform "3.4.3. Nondisclosure mode 2" to enter the Service mode.
2. Press the [7][4] buttons of remote control in the Service mode to enter the Special mode.
3. If the new USB-HDD is connected, it is automatically formatted/registered. (There is no TV monitor display for registration.)

The USB-HDD registered in the Special mode can be operated using the same functions (format, record/play/edit, dubbing)
as those for USB-HDDs registered in the Normal mode.
The Special mode can be cancelled at power "OFF" only. (Cancelling the Special mode will erase the registration in the
Special mode.)

3.1.4.

Operation check when USB HDD is connected

Check the operation status (normal or abnormal) of the USB connection part as follows.

1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Registration", then press [OK].

Normal operation:

The registered USB-HDD is automatically displayed when connected.
(*Displayed items differ depending on the connected USB-HDD.)

Abnormal operation (1):

When the USB-HDD cannot be detected, "Cannot detect USB HDD." etc. will be automatically displayed.
(*When the cable (USB cable) between the main unit and the USB-HDD is poorly connected (cable disconnection), etc.)

Abnormal operation (2):

When a wrong USB-HDD incompatible with this unit is connected, "Connected USB device cannot be used with this unit.", etc.
will be automatically displayed.
(*Incompatible USB-HDD: When devices with capacity of less than 160GB or more than 3TB or other USB devices are
connected)

Abnormal operation (3):

When more than 1 USB-HDD are connected at the same time, "Registration of USB HDD must be done with only one USB
storage device connected.", etc. will be automatically displayed.

Abnormal operation (4):

When a USB-HDD compatible only with USB 1.1 or below is connected, "Connected USB device cannot be used with this unit.",
etc. will be automatically displayed.

«
...
9
10
11
12
13
...
»

Summary of Contents for DMR-UBS80EG






























































































Reviews:

No comments

Related manuals for DMR-UBS80EG

Brand: XWave Pages: 32

DVD P191 - MULTI REGION CODE FREE DVD PLAYER. THIS PLAYER PLAYS...

Brand: Samsung Pages: 140

Brand: Panasonic Pages: 40

Brand: Power Dynamics Pages: 28

MusicTube LFA-299x

Brand: Lavod Pages: 26

Brand: Shiro Pages: 2

Brand: Zipy Pages: 52

Brand: Aiwa Pages: 31

Brand: Memorex Pages: 15

Brand: Difrnce Pages: 25

Brand: Arirang Pages: 21

Ultra Slim DB66

Brand: Lenovo Pages: 18

Brand: Sony Pages: 48

Brand: Emerson Pages: 18

Brand: JVC Pages: 36

DIGITAL AUDIO PLAYER XA-MP2

Brand: JVC Pages: 2

Brand: Panasonic Pages: 13

DVDS53 - DVD/CD PLAYER

Brand: Panasonic Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands