3
Burn Firmware
Use one of the methods listed below to burn the firmware to a CD-R disc.
3.1
Windows® OS CD Writing Program
1) Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer.
2) If the below (or similar) screen appears (Windows XP), left click on
CANCEL
.
3) Right click on the
PANA_DVD.FRM
file on the
DESKTOP
, mouse over
SEND TO
, and
then left click on the
CD BURNER DRIVE
.
4) If the below screen appears, left click on
YES
.
NOTE: The below screen may appear momentarily.
DMR-EZ27 DVD Recorder RRT Firmware Installation Instructions
Page 4 of 8
