Convenient functions
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that
supports Deep Colour is connected.
HDMI Audio Output
Select “Off’ when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
7.1ch Audio Reformatting
I BCT8351 | BD-V
|
Surround sound with 6.1 ch or less is
automatically expanded and played back
at 7.1 ch.
• If “Off” is selected, sound is played over
the original number of channels. (Note
that in the case of 6.1 ch audio, playback
will be at 5.1 ch)
Audio reformatting is enabled in the
following cases:
-
When you have selected “PCM” in
“Digital Audio Output”. (O 92)
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If “Automatic” is selected, the optimal
method of playback depending on the TV
(e.g. cinema) will automatically be
selected (only when the TV supports
Contents Type Flag).
Common Interface
Access to software contained on CI module.
(O 14)
•
Select “Slot 1 :” or “Slot 2:” and press
[OK]. Follow the on-screen instructions.
•
This setting cannot be made when “TV
System” is set to “NTSC” (O 94).
EG
•
On-screen instructions may not correspond to the remote
control buttons.
•
For more information about TV service, please contact
your service provider.
•
Depending on the card, in some cases its use together
with this unit may be limited or not possible.
VIERA Link
Select “Off” when you do not want to
use “HDAVI Control”.
VQT4W71
95
Summary of Contents for DMR-BCT835
Page 11: ...u r 10 VQT4W71 ...
