Panasonic DMP-UB314 Operating Instructions Manual Download

Page: 12 / 44

- 12 -

3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.

≥

This connection only supports up to 5.1ch.

≥

To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier
must be ARC-compatible. (

11, “About ARC”)

[UB404]

Enjoying audio with an amplifier connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (

29):

≥

Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (

29)

≥

Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (

29)

≥

To enjoy audio with an amplifier connected to the OPTICAL terminal
Set “Audio Output” to “Off” in “Advanced Settings”. (

30)

Connecting an amplifier to a 4K-compatible TV

[UB404]

Setting

Set the following items in the setup menu (

29):

≥

Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (

29)

≥

Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (

29)

OPTICAL IN

Optical digital cable

Amplifier/receiver

HDMI OUT

(ARC)

HDMI IN

(ARC)

HDMI IN

Amplifier/receiver

HDMI cable

(18 Gbps)

[UB314]

DMP-UB404_314_EG(Dach)-TQBS0057.book 12 ページ２０１７年３月１７日　金曜日　午後７時５分

Summary of Contents for DMP-UB314













































Search results

Summary of Contents for DMP-UB314

Reviews:

Related manuals for DMP-UB314

Brands by name

Popular brands

Panasonic DMP-UB314, Operating Instructions Manual

Search results

Summary of Contents for DMP-UB314

Reviews:

Related manuals for DMP-UB314

Brands by name

Popular brands