25
7.2.
Disassembly from the traverse
unit, assembly of the optical
pick-up unit
7.2.1.
Disassemly
1. Unscrew 2 screws, and remove the Mid base.
2. Unscrew 1 screw, and remove the Nut piece unit.
3. Unscrew 1 screw, and remove the shaft spring.
4. Slightly lift up the shaft by the end, pull it out of the adjust-
ing spring, and remove the spindle as well as the optical
pick-up unit.
NOTE:
In this action, finger stab needs to be put on.
Do not touch any parts other than the positions
marked in the Figure.1 .
Fig.1
