EN
G
L
ISH
35
RQT9185
Disc and card
handling
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc and card handling precautions
≥
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥
Do not attach labels or stickers to discs (This may cause disc
warping, rendering it unusable).
≥
Do not write on the label side with a ball-point pen or other writing
instrument.
≥
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥
Do not use scratch-proof protectors or covers.
≥
Clean any dust, water, or foreign matter from the terminals on the
rear side of the card.
≥
Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Maintenance
Clean this unit with a soft, dry cloth
≥
Never use alcohol, paint thinner or benzine to clean this unit.
≥
Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it
impossible to play discs.
Use the lens cleaner (not included) about once every year,
depending on frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.
To dispose or
transfer this unit
This unit may record information of your operating procedures. If you
discard this unit either by disposal or transfer, then follow the
procedures to return all the settings to the factory presets to delete
the recorded information. (
>
30, “To return to the factory preset”)
≥
When BD-Video is played back, the operation history may be
recorded in the memory of this unit. The recorded contents differ
depending on the disc.
On the unit’s display (continued)
Page
H
or F
≥
There is something unusual. (The service number displayed after H and F depends on the
unit’s condition.)
≥
Check the unit using the troubleshooting guide. If the service number does not disappear,
do the following.
1 Disconnect the plug from the household mains socket wait a few seconds, then
reconnect it.
2 Press [
Í
/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request service from
the dealer. Inform the dealer of the service number when requesting service.
—
30–33
START
≥
The system is being restarted during the firmware update. Please do not turn off power.
9
UPD
/
≥
The firmware is being updated.
9
FINISH
≥
The firmware update is complete.
9
DO
DO NOT
Lens cleaner: RP-CL720E
≥
This lens cleaner is not for sale in Germany and may not be for
sale depending on the region.
≥
This lens cleaner is sold as specific for DIGA, but can be used
without problem on this unit as well.
35
DMP-BD50EG-RQT9185_eng&swe.book 35 ページ ２００８年４月２２日 火曜日 午前１０時３４分
