manualshive.com logo in svg

Panasonic DMC-ZS110, Operating Instructions For Advanced Features, Page: 160 / 406

Share
Download
Panasonic DMC-ZS110 Operating Instructions For Advanced Features Download Page 160

160

SQW0566

Adjusting the focus and brightness (exposure)

Taking pictures with Auto Focus

TZ110/ZS110

 Changing the display of the assist screen

 →   [Custom] → [Pinpoint AF Display]

[FULL]:

  Enlarges the assist screen using the entire screen.

[PIP]:

  Enlarges the assist screen on part of the screen.

 •The display of the assist screen can also be switched by touching [   ].

TZ110/ZS110

 Setting the timeout for the enlarged display

 →    [Custom] → [Pinpoint AF Time] → 

[LONG] 

(approx. 1.5 seconds) 

/ [MID] 

(approx. 1.0 second) 

/  

[SHORT] 

(approx. 0.5 seconds)

Summary of Contents for DMC-ZS110























































































































































































































































































































































































































Reviews:

No comments