Application (View)
Retouching pictures
SQW0206
- 171 -
[Auto Retouch]
You can adjust the colour and brightness of a still picture to bring them into balance.
•New pictures are created after editing pictures with [Auto Retouch]. Before starting
to edit, make sure that there is enough free space in the built-in memory or on the
memory card.
•Example picture
Select a still picture to retouch during playback and press
Use to select [Auto Retouch] and press [MENU/SET]
Use to select [ON] and press [MENU/SET]
•A confirmation screen is displayed. If you select [Yes], the new retouched still
picture is saved.
•When [OFF] is selected, you can restore a picture to its original condition (before
retouching).
■
Operation from the [Playback] menu
Select [Retouch] in the [Playback] menu, and then press [MENU/SET]
Use to select [Auto Retouch] and press [MENU/SET]
Use to select picture and press [MENU/SET]
Read Step above to perform further steps.
●
The retouch effect may be less apparent in some still pictures.
●
Some still pictures may have higher noise levels after retouching.
●
It may not be possible to use [Auto Retouch] with still pictures that have already been
retouched.
●
It may not be possible to retouch still pictures recorded with other cameras.
●
You cannot retouch the pictures in a picture group as a group. Retouch each picture in
a group picture after displaying it.
●
[Auto Retouch] is unable to perform in the following cases:
•Motion pictures
•Panorama pictures
•3D still pictures
•Still pictures recorded with the [Quality] setting [ ], [ ] or [
]
