Panasonic DMC-TZ110 Operating Instructions For Advanced Features Download Page 98

Page: 98 / 406

SQW0566

Recording mode

Taking pictures after automatically setting the aperture value and shutter speed (Programme AE Mode)

•

TZ110/ZS110

The camera automatically removes noise when [Long Shtr NR] is set to [ON] and

the shutter speed is slow. Therefore, [Long shutter noise reduction ongoing] may

be displayed.

(→144)

Although noise reduction requires the same time as the shutter speed for signal

processing, you can take sharp pictures.

•

TZ80/ZS60

The camera automatically removes noise when the shutter speed is slow.

Therefore, [Long shutter noise reduction ongoing] may be displayed.

Although noise reduction requires the same time as the shutter speed for signal

processing, you can take sharp pictures.

Enabling/disabling the exposure meter display

→ [Custom] → [Expo.Meter] → [ON] / [OFF]

●

When you set this function to [ON], an exposure meter is

displayed during Programme Shift, aperture setting, and

shutter speed operation.

●

Proper exposure is not possible in the range indicated in red.

●

If the exposure meter is not displayed, press the [DISP.]

button to switch the display of the monitor.

(→53)

Exposure meter

250 125

5.6

4.0

2.8

●

The exposure meter will turn off if no operation is performed for approximately

4 seconds.

Summary of Contents for DMC-TZ110























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ110

Reviews:

Panasonic DMC-TZ110, Operating Instructions For Advanced Features, Page: 98 / 406

Search results

Summary of Contents for DMC-TZ110

Reviews: