Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 60 / 406

SQW0550

Basics

Buttons/Dials/Levers Used for Recording

■

About diopter adjustment

Rotate the diopter adjustment dial to adjust until you

are able to clearly see the characters displayed in the

viewfinder.

TZ100/TZ101

TZ80/TZ81

Setting the sensitivity of the eye sensor or setting to switch the

display between the viewfinder and monitor

→

[Custom

] → [

Eye Sensor]

[Sensitivity]

Use this setting to set the sensitivity of the eye sensor.

[HIGH] / [LOW]

[LVF/Monitor Switch]

Use this setting to switch the display between the viewfinder and monitor.

[LVF/MON AUTO] (Automatic switching between viewfinder and

monitor) / [LVF] (Viewfinder display) / [MON] (Monitor display)

•After the display is switched using the [LVF] button, the setting of [LVF/

Monitor Switch] will also change.

Adjusting/not adjusting the focus automatically when the eye sensor

is activated

→

[Custom

] → [

Eye Sensor AF

] → [

ON] / [OFF]

•Even when [Eye Sensor AF] is set and the camera automatically adjusts the focus, a

beep will not sound.

•[Eye Sensor AF] may not work when the lighting is low.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands