Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 57 / 406

SQW0550

Basics

Buttons/Dials/Levers Used for Recording

During playback

With information

Detailed information

display

Histogram display

Without information

([Highlight

])

100-0001

10:00 1.DEC.2016

100-0001

1/98

Without information

This screen is not displayed during Playback Zoom, Motion Picture Playback, Automatic Scrolling

Playback of panorama pictures, continuous playback or Slide Show.

This screen is displayed only when [Highlight

] (below) in the [

Custom] menu is set to [ON].

If no operation is performed for a few seconds, [ ] and other touch icons will disappear.

•

A histogram of each colour, including R (red), G (green), B (blue), and Y (luminance), is

separately displayed during playback.

Enabling/disabling the overexposed area display

→

[Custom

] → [

Highlight

] → [

ON] / [OFF]

You can set overexposed areas (areas that are too bright and where there are no shades

of grey) to flash on the screen when the [

Auto Review] function is activated or during

playback. This does not affect recorded pictures.

•To reduce overexposed areas, record a picture by setting

negative exposure compensation

(→

177

)

using the histogram

display

(→

)

and so on as a reference.

•This feature is disabled during 4K photo playback, playback

of pictures recorded in Post Focus, Multi Playback, Calendar

Playback, or Playback Zoom.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands