Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 305 / 406

305

SQW0550

Wi-Fi

Operating the camera by connecting it to a

smartphone

You can remotely operate the camera using a smartphone.

The “Panasonic Image App” (hereafter “Image App”) must be installed on your

smartphone.

Installing the smartphone/tablet app “Panasonic Image App”

For Android™ apps

For iOS apps

Supported OS

Android 4.0 or later

iOS 7.0 or later

Installation

procedure

Connect your Android device to a

network

Select “Google Play

Store”

Enter “Panasonic Image App” or

“LUMIX” to search for the app

Select “Panasonic Image App” and

install it

•The icon will be added to

the menu.

Connect the iOS device to the

network

Select “App Store

”

Enter “Panasonic Image App” or

“LUMIX” to search for the app

Select “Panasonic Image App” and

install it

•The icon will be added to

the menu.

•Use the latest version.

•Supported OS versions as of January 2016. Supported OS versions may be changed

without prior notice.

•The service may not be able to be used properly depending on the type of smartphone

being used.

For the latest information on the “Image App”, refer to the support site below.

http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only.)

•When downloading the app on a mobile network, high packet communication fees may

be incurred depending on the details of your contract.

•For details about the operating procedure, etc., refer to [Help] in the “Image App” menu.

•If you connect the camera and smartphone over a Wi-Fi connection and run “Image

App”, [Help] may not be displayed in the “Image App” menu for some smartphones. In

such a case, disconnect the Wi-Fi connection with the camera, connect the camera to

a cellular data line such as 3G and LTE, or the Internet to display [Help] in the “Image

App” menu.

•Some of the screens and information provided in this document may be different

depending on the supported operating system and “Image App” version.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands