292
SQW0550
Playing Back and Editing Pictures
Using the [Playback] menu
[Video Divide]
A single motion picture can be split into 2 parts. This is convenient when you want to keep
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free
space on your card, such as when travelling.
1
Set the menu
→
[Playback
] → [
Video Divide]
2
Use to select a motion picture to split and press [MENU/SET]
3
Press at where you want to split a motion picture to pause it
•If you press while paused, you can make finer adjustments to the splitting positions in a
motion picture.
4
Press
•
The original motion picture that was split does not remain.
(There will only be the 2 motion pictures that were created after
the split.)
●
During dividing, do not turn off the camera or remove the card or battery. If you do so, the motion
picture may be deleted.
●
Motion pictures cannot be divided at a location close to the start or end of the motion picture.
●
This function is not available in the following cases:
•Pictures recorded using [Post Focus]
•Motion pictures with a short recording time
