Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 281 / 406

281

SQW0550

Playing Back and Editing Pictures

Using the [Playback] menu

■

To change settings such as music or display time

Select [Effect] or [Setup] and press [MENU/SET].

[Effect]

[AUTO] / [NATURAL] / [SLOW] / [SWING] / [URBAN] / [OFF]

[Setup]

[Duration]

[5SEC] / [3SEC] / [2SEC] / [1SEC]

[Repeat]

[ON] / [OFF]

[Sound]

[AUTO]: With still pictures, music will play back, and with motion

pictures, audio will play back.

[Music]: Music effect will play back.

[Audio]: Audio is played back from motion pictures.

[OFF]: Music and audio will not play back.

●

When [URBAN] has been selected, the picture may appear in black and white as a screen effect.

●

[AUTO] can be used only when [Category Selection] is selected. The pictures are played back with

the recommended effects for each category.

●

[Effect] is fixed to [OFF] when in [Video Only], or during the slide show for [ ], [

], or [ ] in

[Category Selection].

●

During slide shows of 4K photo burst files, pictures recorded in [Post Focus], or group pictures,

effects will stay turned off even if [Effect] is set.

●

When you play back the following pictures in a slide show, the [Duration] setting is disabled.

•Motion pictures

•4K burst files

•Pictures recorded using [Post Focus]

•Panorama pictures

•Group pictures

●

[Duration] can be set only when [Effect] is set to [OFF].

●

Part of [Effect] cannot be used when displaying pictures on television using an HDMI micro cable

or when displaying pictures recorded in portrait position.

[Playback Mode]

Recorded pictures can be played back in a variety of ways.

Set the menu

→

[Playback

] → [

Playback Mode]

Use to select the item and press [MENU/SET]

•If you select [Video Only], 4K burst files recorded with the 4K

Photo function and pictures recorded using [Post Focus] will also

be played back.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands