Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 279 / 406

279

SQW0550

Playing Back and Editing Pictures

Using the [Playback] menu

You can specify picture protection, resizing, print settings, and other settings for pictures

you have taken.

•For the setting procedures of the menu.

(→

)

●

In the following cases, new pictures are created after they have been edited. Before starting to

edit, make sure that there is enough free space in the memory card.

•

TZ100/TZ101

[RAW Processing]

•[Light Composition]

•[Clear Retouch]

•[Text Stamp]

•[Time Lapse Video]

•[Stop Motion Video]

•[Resize]

•[Cropping]

●

It may not be possible to set or edit pictures taken with other cameras.

■

How to select an image(s) after selecting [Single] or [Multi]

Some menu items allow you to specify how to select an image(s).

[Single]

Use to select a still picture and press [MENU/SET]

•If [Set/Cancel] is displayed at the right bottom of the screen, the

setting is cancelled when [MENU/SET] is pressed again.

Set

[Multi]
When a screen similar to the one on the right is

displayed:

Use to select a still picture and press

[MENU/SET

] (repeat)

•

To cancel → Press [

MENU/SET] again.

Use to select [OK] and press [MENU/SET]

When a screen similar to the one on the right is

displayed:

Set/Cancel

Use to select a still picture and press

[MENU/SET

] (repeat)

•

To cancel → Press [

MENU/SET] again.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands