Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 277 / 406

277

SQW0550

Playing Back and Editing Pictures

Deleting pictures

Deleted pictures cannot be recovered.

Pictures will not be deleted in the following cases:

•Protected pictures.

•Card switch is in “LOCK” position.

•Pictures that are not based on the DCF standard.

(→

269

)

●

Do not turn off the camera while deleting.

●

Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional).

[Delete Single]

Press [ ] button to delete displayed picture

•The same operation can be performed by touching [ ].

TZ100/TZ101

TZ80/TZ81

Use to select [Delete Single] and press [MENU/SET]

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands