Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 261 / 406

261

SQW0550

Recording motion pictures

Taking still pictures while a motion picture is being

recorded

Recording mode:

Press the shutter button fully during the

motion picture recording

•Up to 30 pictures can be recorded.

•When you take a still picture, the simultaneous

still/motion picture recording icon is displayed.

•Recording with the Touch Shutter function

(→

)

also available.

●

The aspect ratio of a still picture is fixed to [16:9].

●

Takes a still picture using [Picture Size] [S

] (2M). The picture quality may be different to [

] (2M) of

standard pictures.

●

Only pictures in JPEG file format are recorded when [Quality] is set to [

], [

], or [ ].

([Quality] is used with the [ ] setting when [

] is set.)

●

When the Creative Control Mode is set to [Miniature Effect], a still picture may be taken with a

slight delay from the time you fully press the shutter button.

●

This function is not available in the following cases:

•

TZ100/TZ101

When [Rec Format] is set to [MP4], [Rec Quality] is set to [4K/100M/25p], [4K/100M/24p], or

[VGA/4M/25p]

•

TZ80/TZ81

When [Rec Format] is set to [MP4], [Rec Quality] is set to [4K/100M/25p] or [VGA/4M/25p]

•When [Snap Movie] is set to [ON]

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands