Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 241 / 406

241

SQW0550

Stabiliser, Zoom and Flash

Taking pictures with flash

Recording mode:

With the flash you can take pictures in dark places or adjust the entire contrast of a

picture by illuminating a subject with a bright background.

■

TZ100/TZ101

Open/Close the built-in flash

To open the flash

Slide the flash open lever.

•

Be careful when opening the flash as the flash

will jump out.

To close the flash

Press the flash until it clicks.

•

Be careful not to catch a finger or any other

part of your body or any object when you close

the flash.

•Forcibly closing the flash can damage the camera.

•Be sure to close the built-in flash when not in use.

•The flash setting is fixed to [ ] while the flash is

closed.

■

TZ80/TZ81

Use / Do not use flash

You can record with flash as appropriate to the recording mode.

Setting the way the flash works

(→

244

)

If you do not wish to use flash,

press the [ ] button (

) and select [ ] (Forced Flash Off).

●

The flash is fixed to [

] (Forced Flash Off) in the following cases:

•During motion picture recording

•When recording 4K photos

•When recording using [Post Focus]

•When using the electronic shutter

•When [HDR] is set to [ON]

•When [Silent Mode] is set to [ON]

•When a picture effect in [Filter Effect] of [Filter Settings] is set

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands