Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 121 / 406

121

SQW0550

Recording mode

Taking Pictures with different picture effects (Creative Control Mode)

Taking a picture with a blurred background (Defocus control function)

You can easily set the blurriness of the background while checking the screen.

Press to display the setting screen

•Each press of

switches between brightness (exposure) setting operation (below), blur control

operation, and operation finish.

TZ100/TZ101

Rotate the rear dial to set

TZ80/TZ81

Rotate the control dial to set

•Press [MENU/SET] to return to the recording screen.

•Pressing [Q.MENU/ ] button on the blurriness setting screen

will cancel the setting.

250 125

8.0

5.6

2.8

4.0

●

This function is not available in the following case:

•[Miniature Effect

] (Creative Control Mode)

Setting brightness (exposure)

Press to display the setting screen

•Each press of

switches between brightness (exposure) setting operation, blur control

operation (above), and operation finish.

TZ100/TZ101

Rotate the rear dial to set

TZ80/TZ81

Rotate the control dial to set

■

Change the settings by using the touch screen

Touch [ ]

Touch the item you want to set

[ ]: Adjusting the picture effect

[ ]: Degree of defocusing

[

]: Brightness (exposure)

Drag the slide bar to set

•Press [MENU/SET] to return to the recording screen.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands