Panasonic DMC-G85 Operating Instructions For Advanced Features Download

Page: 218 / 338

9. Using Menu Functions

218

[Eye Sensor]

Setting the eye sensor sensitivity and the method for
switching between the monitor and viewfinder.

P38

[Touch Settings]

Enables/disables the Touch operation.

[Touch Screen]:

All touch operations.

[Touch Tab]:

Operations of tabs, such as [ ] on the right side of the
screen.

[Touch AF]:

Operation to bring the subject you touch into focus ([AF])
or adjust the focus and brightness ([AF+AE]).

[Touch Pad AF]:

Operation to move the AF area by touching the monitor
when the viewfinder is in use.

(P100)

[Touch Scroll]

This allows you to set the speed of continuously forwarding
or rewinding pictures using touch operation.

[Menu Guide]

Sets whether or not to display a selection screen when you
set the mode dial to [

]/[

[Shoot w/o Lens]

Sets whether or not the shutter can be released when no
lens is attached to the main body.

[Custom]

Summary of Contents for DMC-G85



















































































































































































































































































































































Search results

Summary of Contents for DMC-G85

Reviews:

Related manuals for DMC-G85

Brands by name

Popular brands

Panasonic DMC-G85, Operating Instructions For Advanced Features

Search results

Summary of Contents for DMC-G85

Reviews:

Related manuals for DMC-G85

Brands by name

Popular brands