Panasonic DMC-CM1, Operating Instructions Manual, Page: 57 / 194

4. Camera
57
Recording Mode:
Set the Recording Mode to [ ]. (P51)
∫ Programme Shift
In Programme AE Mode, you can change the preset aperture value and shutter speed without changing the
exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a moving subject more
dynamically by slowing the shutter speed when taking a picture in Programme AE Mode.
1
[ ] > [ ]. (P84)
2
Rotate the control ring to perform Programme Shift.
A
Exposure meter
≥
The Programme Shift indication
B
appears on the screen.
≥
To cancel Programme Shift, either change the Recording Mode,
or rotate the control ring until the Programme Shift display
disappears.
≥
Tap [ ] to return to the Recording screen.
Taking Pictures with Your Favourite Settings (Programme AE Mode)
The unit automatically sets the shutter speed and aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.
≥
Programme Shift is available in all [Sensitivity] settings except [ ].
≥ If the exposure is not adequate, the aperture value and the shutter speed turn red and blink when the shutter
button is pressed halfway.
100
80
60
50
40
4.0
4.5
5.0
5.6
60 60 60 5.0 5.0 5.0
AWB AWB AWB
0 3 3
6.3
AU AU
T
o AU
T
o AU
T
o
A
B