Panasonic Digital Palmcorder PV-DV101, Manual

Page: 198 / 289

26
Remote Control (Optional)
You can control any two Panasonic
Palmcorders with one Remote control. In
order for the remote to distinguish between
the two units, it is necessary to set one of
the Palmcorders to VCR 2. On the remote,
press VCR 1 or VCR 2 to control the
desired Palmcorder.
CAMERA
PHOTO
SHOT DISPLAY
ON TV
COUNTER/
TC
DATE/
TIME
RESET
REC
/ REW
SLOW/
F.ADV
INDEX
SEARCH STOP/
SET INDEX
SEARCH
PAUSE/
SEL SLOW/
F.ADV
PLAY
REC/
PAUSE
ZOOM
A.DUB
SPKR
V
O
L
T
W
MENU
FF/
For VCR 2 :
Press these
buttons at the
same time.
For VCR 1 :
Press these
buttons at the
same time.
Remote Controlling Two
Palmcorders
Note
1
Set the POWER to VCR or CAMERA.
• The POWER Lamp lights red.
• Be sure POWER is fully turned to
VCR or CAMERA position.
2
Press MENU to display the VCR or
CAMERA mode menu screen.
3
Rotate JOG KEY to select CAMERA
SET-UP in the CAMERA mode menu
screen or VCR PLAY MODE in the
VCR mode menu screen, then press
JOG KEY to display the CAMERA
SET-UP or VCR PLAY MODE menu
screen.
4
Rotate JOG KEY to select REMOTE ,
and then press JOG KEY to select
VCR 2. (See pages 16, 17). Leave the
other Palmcorder set to VCR1.
5
Set the Remote Control to VCR 1 or
VCR 2 to correspond with the
Palmcorder you wish to control. (See
above left.)
• When the Palmcorder and remote are
not set to the same mode (VCR1 or
VCR2), “CHECK REMOTE MODE
(REMOTE)” will appear.
• After replacing the Remote Control
Battery, the remote will default to VCR 1.
Remote Control (Optional)
Replace battery with Panasonic PART NO. VSBW0004 (CR2025)
only. Use of another battery may present a risk of fire or explosion.
Caution: battery may explode if mistreated. Dispose of used battery
properly. Keep away from children. Do not recharge, disassemble or
dispose of in fire.
1
While pressing the tab in the direction of the arrow (A) with
your fingernail, pull out the Battery Tray (B).
2
Insert the battery into the Battery Tray with the
+
mark
facing down.
Do not reverse the polarity.
3
Insert the Battery Tray.
Replace the Battery
A
+
B